[Aux Settings]
[Trace Settings]
[[ChipWhisperer/Native]]
Config File = 
Format = 
[Trace Settings]
[Target Settings]
[[Simple Serial]]
Connection = NewAE USB (CWLite/CW1200)
Key Length (Bytes) = 16
Input Length (Bytes) = 16
Output Length (Bytes) = 16
[[[Protocol Version]]]
Version = auto
Timeout (ms) = 20
[[Simple Serial]]
Preset Mode = Custom
Init Command = 
Load Key Command = 
Load Input Command = 
Go Command = p$TEXT$\n
Output Format = 
[[[NewAE USB (CWLite/CW1200)]]]
baud = 38400
[Target Settings]
[Scope Settings]
[[ChipWhisperer/OpenADC]]
Connection = NewAE USB (CWLite/CW1200)
Auto-Refresh DCM Status = True
[[[NewAE USB (CWLite/CW1200)]]]
Serial Number = Auto
[[[[ChipWisperer-Lite USB]]]]
[[ChipWhisperer/OpenADC]]
[[[OpenADC]]]
[[[[HW Information]]]]
Version = (1, 8, 'ChipWhisperer-Lite', 0)
Synth Date = unknown
System Freq = 96000000
Max Samples = 24400
[[[OpenADC]]]
[[[[Gain Setting]]]]
Mode = low
Setting = 45
Result = 22.50390625
[[[OpenADC]]]
[[[[Trigger Setup]]]]
Trigger Pin State = False
Mode = rising edge
Timeout (secs) = 2
Offset = 0
Pre-Trigger Samples = 0
Total Samples = 24000
Downsample Factor = 1
Trigger Active Count = 22292
[[[OpenADC]]]
[[[[Clock Setup]]]]
[[[[[ADC Clock]]]]]
Source = CLKGEN x1 via DCM
Phase Adjust = 0
ADC Freq = 7384609
ADC Sample Rate = 7384609
DCM Locked = True
[[[[Clock Setup]]]]
Freq Counter = 0
Freq Counter Src = EXTCLK Input
[[[[[CLKGEN Settings]]]]]
Input Source = system
Input Frequency = 10000000.0
Multiply = 2
Divide = 26
Desired Frequency = 7384615
Current Frequency = 7384615
DCM Locked = True
[[ChipWhisperer/OpenADC]]
[[[CW Extra]]]
[[[[CW Extra Settings]]]]
[[[[[Trigger Pins]]]]]
Target IO1 (Serial TXD) = False
Target IO2 (Serial RXD) = False
Target IO3 (SmartCard Serial) = False
Target IO4 (Trigger Line) = True
Collection Mode = OR
[[[[CW Extra Settings]]]]
Trigger Module = Basic (Edge/Level)
Clock Source = Target IO-IN
Target HS IO-Out = CLKGEN
HS-Glitch Out Enable (High Power) = 0
HS-Glitch Out Enable (Low Power) = 0
[[[[[Target IOn Pins]]]]]
Target IO1 = Serial RXD
Target IO2 = Serial TXD
Target IO3 = High-Z
Target IO4 = High-Z
[[[[CW Extra Settings]]]]
[[[[[Target IOn GPIO Mode]]]]]
Target IO1: GPIO = Disabled
Target IO2: GPIO = Disabled
Target IO3: GPIO = Disabled
Target IO4: GPIO = Disabled
nRST: GPIO = Default
PDID: GPIO = Default
PDIC: GPIO = Default
[[[[CW Extra Settings]]]]
Target Power State = True
[[[CW Extra]]]
[[[[Glitch Module]]]]
Clock Source = Target IO-IN
Glitch Width (as % of period) = 10
Glitch Width (fine adjust) = 0
Glitch Offset (as % of period) = 10
Glitch Offset (fine adjust) = 0
Glitch Trigger = Manual
Single-Shot Arm = After Scope Arm
Ext Trigger Offset = 0
Repeat = 1
Output Mode = Clock XORd
[Scope Settings]
[Generic Settings]
Scope Module = ChipWhisperer/OpenADC
Target Module = Simple Serial
Trace Format = ChipWhisperer/Native
Auxiliary Module = None
[[Acquisition Settings]]
Number of Traces = 2
Number of Sets = 1
Traces per Set = 2
Key/Text Pattern = Basic
[Generic Settings]
[[Basic]]
Key = Random
Plaintext = Fixed
Fixed Plaintext = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00